Frequently asked questions

Curing temperatures are an issue at cold temperatures. Is there any solution?

To resolve the problem of the slow polymerisation time of resins such as Demotec 90 or Demotec 95 at lower temperatures, we have developed Demotec Accelerator which reduces the polymerisation time in an effective, predictable and scientific manner - irrespective of temperature. You only have to add the Accelerator to the liquid of Demotec 90 or 95 and then the polymerisation time is up to 50 percent quicker.

For Demotec EASY BLOC we offer the blue special resin, that cures extremely quick. At the same price as the normal version.

FuturaPad has no temperature issue as it cures in the same speed at any temperature between -15°C and 35°C.

Sometimes the normal wooden block is too small. Do you offer other sizes?

For Easy Bloc and FuturaPad, we can offer XL sizes. The block will be 20 mm longer to give large claws proper support.

For the wooden block systems a various program of special sizes available. Even if the normal size is still the most popular version, but Demotec offers a lot of special sizes. Thicker blocks, wider blocks, longer blocks and wedge shaped blocks are available. If requested there are individual sizes available - referring to customers needs: Please ask.

What is the difference between Demotec 90 and 95?

Demotec 95 in direct comparison with Demotec 90 is simply the better product and it has enormous differences.

Demotec 90 is an old fashioned product and comparative to old fashioned products of other competitors with it's disadvantages.

The difference of Demotec 90 and 95 is in the handling. There is a little experience needed to find out the right timing for the treatment with Demotec 90. Demotec 95 instead you only have to mix and than no further waiting is necessary so the treatment can start without any delay.

A further big advantage is that the mixed resin of Demotec 95 doesn't stick to your fingers as Demotec 90 or other old fashioned resins do. So you can put the complete resin into your hands and model it as you like - in a very comfortable way. Watch our videos (Video comparison / non-adhesive).

What can be done to remove the Demotec EASY BLOC after a successful treatment?

The Demotec EASY BLOC consists of a flexible top and a massive plastic block that carries the bovine weight. To remove the EASY BLOC by hand, perforate the flexible top with pliers. Then the flexible top can be removed. Without the top the EASY BLOC looses it's stability and you can remove the massive plastic block easily.

Hauptbestandteil unserer Kunststoffe ist Methylmethacrylat. Methylmethacrylat ist einer der am besten untersuchten Kunststoffe. Das rührt daher, dass dieser Kunststoff in modifizierter Form sowohl in der Dentalmedizin als Prothesenmaterial als auch in der Humanmedizin als Knochenzement in und am menschlichen Körper eingesetzt wird.

Die Belastung über die Raumluft wird als MAK-Wert gemessen. Sicherheitsdatenblätter mit den detaillierten Angaben für den jeweiligen Kunststoff sind jederzeit bei uns verfügbar. Sprechen Sie uns bei Bedarf an.

Generell kann aber gesagt werden, dass bei den kleinen Mengen der Flüssigkeiten, die für die Behandlung verwendet werden, die MAK-Werte nicht überschritten werden. Sicherheitshalber sollte der Arbeitsplatz aber immer gut belüftet sein. Unsere Flüssigkeiten verschicken wir - wie Sie wissen - in Glasflaschen. Durch Glas kann Methymethacrylat nicht diffundieren. Allerdings kann es passieren, dass sich die Stufenkapseln, die wir als Ausgießhilfe den Flaschen beilegen, unter gewissen Bedingungen (Vibrationen, Temperaturschwankungen) etwas lockern. Das ist auch der Grund, warum wir diese Ausgießhilfe nicht sofort werksseitig als Verschluss einsetzen.

So wie Sie Ihre Frage formulierten, vermuten wir, dass eventuell eine Kleinstmenge der Flüssigkeit über diesen Weg ausgetreten ist. Da Methylmethacrylat einen starken Geruch entwickelt, werden selbst kleinste Mengen sofort lokalisiert. Das ist ein guter, zusätzlicher Warnindindikator. Beim Austritt von wenigen Tropfen haben Sie nicht damit zu rechnen, dass die MaK-Werte deutlich unterschritten werden. Aber Sie sollten in jedem Falle, wenn Sie einen Methylmethacrylat-Geruch feststellen, den Innenraum durchlüften.

If there are any questions left, please do not hesitate to contact us.